Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuring BGP IP VPN
2-161
Run as demand circuit
DoNotAge LSA allowed. Cost of using 1 State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Hello due in 00:00:06
Adjacency State FULL (Hello suppressed)
Index 2/2, retransmission queue length 0, number of retransmission 0
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 0, maximum is 0
Last retransmission scan time is 0 msec, maximum is 0 msec
DES-7200# show ip ospf 10 neighbor
Neighbor ID Pri State Dead Time Address Interface
192.168.0.1 0 FULL/ - - 192.168.0.1 OSPF_SL0
DES-7200# show ip route vrf VPNA
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default
C 192.168.30.0/24 is directly connected, Gi1/2
O 192.168.40.0/24 [110/101] via 192.168.30.2, 00:56:23, Gi1/2
O 192.168.20.0/24 [110/2] via 172.168.0.1, 00:00:36
2.5.13.3 Configure multiple OSPF instances on
MCE
Networking requirements
The client site involves multiple services, with same service communicating with each other over
MPLS backbone network and different services isolated from each other.