Filter
Top Products
DES-7200 Configuration Guide Chapter 10 MSTP Configuration
10-47
# Enable BPDU Guard function globally and set the interface Fa 0/3 to Port
Fast-enabled port.
DES-7200(config)# spanning-tree portfast bpduguard default
DES-7200(config)# interface fastEthernet 0/3
DES-7200(config-if)#spanning-tree portfast
%Warning: portfast should only be enabled on ports connected to a single host.
Connecting hubs, DES-7200es, bridges to this interface when portfast is enabled,can
cause temporary loops.
DES-7200(config-if)# end
# View the spanning tree configurations
DES-7200# show spanning-tree
StpVersion : MSTP
SysStpStatus : ENABLED
MaxAge : 20
HelloTime : 2
ForwardDelay : 15
BridgeMaxAge : 20
BridgeHelloTime : 2
BridgeForwardDelay : 15
MaxHops: 20
TxHoldCount : 3
PathCostMethod : Long
BPDUGuard : enabled
BPDUFilter : Disabled
LoopGuardDef : Disabled
###### mst 0 vlans map : 1, 4-4094
BridgeAddr : 00d0.f82a.aa8e
Priority: 32768
TimeSinceTopologyChange : 0d:0h:19m:44s
TopologyChanges : 1
DesignatedRoot : 1000.00d0.f822.33aa