DES-7200 Configuration Guide Chapter 5 Port-based Flow Control Configuration
5-20
interface GigabitEthernet 0/13
switchport mode trunk
storm-control broadcast
storm-control multicast
storm-control unicast
Step 2: Check the configurations of Switch B. Key points: whether storm control has
been enabled on respective ports, and whether port protection has been enabled on
the port directly connecting with users.
DES-7200#show running-config
vlan 3
!
interface GigabitEthernet 0/1
switchport mode trunk
storm-control broadcast
storm-control multicast
storm-control unicast
!
interface GigabitEthernet 0/5
switchport access vlan 3
switchport protected
storm-control broadcast
storm-control multicast
storm-control unicast
!
interface GigabitEthernet 0/9
switchport access vlan 3
switchport protected
storm-control broadcast
storm-control multicast
storm-control unicast
Step 3: View address bindings on the ports of Switch A and ARP check enabling state.
DES-7200#show port-security all
Vlan Port Arp-Check Mac Address IP Address Type remaining Age (mins)
---- -------- ---------- -------------- --------------
2 Gi0/5 Enabled 0000.0000.0001 1.1.1.1 Configured -
2 Gi0/9 Enabled 0000.0000.0002 1.1.1.2 Configured -
Step 4: View port security configurations on GigabitEthernet 0/5 of Switch B. Port
security configurations on other ports won't be further introduced.
DES-7200#show interfaces gigabitEthernet 0/5 switchport
Interface Switchport Mode Access Native Protected VLAN lists
------------------------ ---------- --------- ------ ------