Filter
Top Products
DES-7200 Configuration Guide Chapter 1 File System Configuration
1 343040 2009-01-01 02:02:59 a.dat
1 10838016 2009-01-01 00:08:38 firmware.bin
1 399 2009-01-01 00:01:37 config.text
----------------------------------------------------------
----
3 Files (Total size 11181455 Bytes), 0 Directories.
Total 33030144 bytes (31MB) in this device, 20492288 bytes
(19MB) available.
1.3.4 Uploading Files through
xModem
The following example shows how to upload config.txt from the local device throuhg xModem
to C:\Documents and Settings\ju of PC:
Step 1: Use serial cable to connect the serial interface of PC and the serial interface of the
device.
Step 2: Run the hyperterminal of Windows to connect to the console of the device.
Step 3: In the privileged mode, use the following command to upload file:
DES-7200# copy flash:/config.text xmodem
Step 4: In the Windows hyperterminal of local device, select Receive files of Transmit menu, as
shown below:
Step 5: In the pop-up dialog box, select the place to save the uploaded file and xModem. Click
Receive. The Windows hyperterminal prompts to set the name used to store the file. Click OK.
Step 6: Check the configuration.
1-8