Filter
Top Products
DES-7200 Configuration Guide Chapter 7 RLDP Configuration
7-8
Note
The errdisable recover command can be used in the global
configuration mode to restart, instantly or at fixed time, the RLDP
detection of the port that is set violation by RLDP. It is worth
mentioning that when there are some relay devices between rldp
ports, if you use errdisable recover interval to restore the fault
timely, you need to set the value of rldp detection time greater
than that of errdisable recover interval, that is, the value of
detect-interval* detect-max total time is greater than that of
errdisable recover interval to prevent error judgment.
7.3 Viewing RLDP
Information
The following RLDP-related information can be viewed:
z View the RLDP status of all ports
z View the RLDP status of the specified port
7.3.1 Viewing the RLDP Status of
All Ports
In the privileged mode, run the following commands to view the RLDP global
configuration and the port detection information with RLDP detection
configured:
Command Function
DES-7200# show rldp
View the RLDP global configuration and the
port detection information with RLDP
detection configured
In the example below, the show rldp command is used to view the detection
information of all RLDP ports:
DES-7200# show rldp
rldp state : enable
rldp hello interval : 2
rldp max hello : 3
rldp local bridge : 00d0.f8a6.0134
------------------------------------------------
interface GigabitEthernet 0/1
port state:normal
neighbor bridge : 00d0.f800.41b0
neighbor port : GigabitEthernet 0/2
unidirection detect information:
action : shutdown svi