DES-7200 Configuration Guide Chapter 5 OSPF
Configuration
5-35
Verify configurations
Step 1: Verify whether the configurations are correct. Key point: whether the
instance ID for establishing adjacency between switches is correct.
SwitchA:
vlan 100
!
interface VLAN 100
no ip proxy-arp
ipv6 address 3001::1/64
ipv6 enable
ipv6 ospf 10 area 0 instance 1
!
ipv6 router ospf 10
router-id 1.1.1.1
SwitchB:
vlan 100
!
interface VLAN 100
no ip proxy-arp
ipv6 address 3001::2/64
ipv6 enable
ipv6 ospf 10 area 0 instance 1
!
ipv6 router ospf 10
router-id 2.2.2.2
SwitchC:
vlan 100
!
interface VLAN 100
no ip proxy-arp
ipv6 address 3001::3/64
ipv6 enable
ipv6 ospf 10 area 0
!
ipv6 router ospf 10
router-id 3.3.3.3
SwitchD:
vlan 100
!