Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
Command Function
DES-7200(config-line)# speed speed
Set transmission rate in bps on the console interface. For a
serial interface, you can only set the transmission rate to
one of 9600, 19200, 38400, 57600 and 115200 bps, with
9600 bps by default.
This example shows how to configure the baud rate of the serial interface to
how line console 0 //View the console configuration
speed Overruns
* 0 CON 57600 0
Total output: 115 bytes
bytes
stop rx interrupt: 0 times
2.10 Configuring Telnet
57600 bps:
DES-7200# configure terminal //Enter the global configuration
mode.
DES-7200(config)# line console 0 //Enter the console line
configuration mode
DES-7200(config-line)# speed 57600 //Set the console rate to 57600bps
DES-7200(config-line)# end //Return to the privileged mode
DES-7200# s
CON Type
Line 0, Location: "", Type: "vt100"
Length: 25 lines, Width: 80 columns
Special Chars: Escape Disconnect Activation
^^x none ^M
Timeouts: Idle EXEC Idle Session
never never
History is enabled, history size is 10.
Total input: 22 bytes
Data overflow: 0
Modem: READY
2.10.1 Overview
T otocol in t
s ns of remote logon and virt communication functions.
The Telnet Client service is used by the ote user who has logged
wn below, after setting
h the
e Switch B for man
elnet, an application layer pr
pecificatio
he TCP/IP protocol suite, provides the
ual terminal
local or rem
onto the local network device to work with the Telnet Client program to access
other remote system resources on the network. As sho
up a connection with Switch A throug terminal emulation program or Telnet,
users can log on th agement and configuration with the telnet
command.
2-15