Filter
Top Products
DES-7200 Configuration Guide Chapter 1 Protocol-Independent
Configuration
1-19
DES-7200(config-router)# no auto-summary
# Configure the extended ACL
DES-7200(config)# access-list 10 permit 192.168.1.0
DES-7200(config)# access-list 10 permit 172.16.1.0
1.6.3 Example of Dynamic Route Protocol Redistribution
Configuration requirements
The connection among four routers is shown in the Figure-1. Router A belongs to
the OSPF routing area, Router C belongs to the RIP routing area, Router D
belongs to the BGP routing area and Router B is connected to three routing areas.
Router A advertises the two routes of 192.168.10.0/24 and 192.168.100.1/32,
Router C advertises the network routes of 200.168.3.0/24 and 200.168.30.0/24,
and Router D advertises the network routes of 192.168.4.0/24、192.168.40.0/24.
Figure-1 Example of Dynamic Routing Protocol Redistribution
On Router B, the OSPF redistributes the RIP routes with the route Type-1,
redistributes the BGP routes carrying with the community attribute 11:11. The RIP
redistributes the 192.168.10.0/24 route in the OSPF routing area whose metric is
3, amd advertises a default route to the RIP routing area.
Detailed configuration