Filter
Top Products
DES-7200 Configuration Guide Chapter 4 LACP Configuration
4-5
Command Function
DES-7200(config-if)# port-group key
mode active | passive
Add the port to the aggregation group
and specify the LACP port mode. If
the aggregation group does not exist,
an aggregation group will be created.
key: the administrative key of the
aggregation group.
active: the port is added to the
dynamic aggregation group in the
active mode.
passive: the port is added to the
aggregation group in the passive
mode.
DES-7200(config-if)# end
Return to the privileged mode.
4.6.2 Viewing the
LACP
Configuration
To view the LACP state, run the following command in the privileged mode:
Command Function
DES-7200# show lacp summary
Show the LACP state information.
4.7 LACP Configuration
Example
Figure-2 LACP Link Aggregation