Filter
Top Products
DES-7200 Configuration Guide Chapter 1 AAA Configuration
1-33
Command Function
authorization network {default |
list-name}
In the domain configuration mode, select the
authorization method list.
Use this command to configure the domain state:
Command Function
state {block | active}
In the domain configuration mode, set the domain
state.
Use this command to check whether the username carries with the domain-name information:
Command Function
username-format {without-domain |
with-domain}
In the domain configuration mode, check whether
the username carries with the domain-name
information when the NAS is interacting with the
server.
Use this command to set the maximum user number supported in the domain:
Command Function
access-limit num
In the domain configuration mode, set the
maximum user limit in the domain. By default, no
user limit has been configured(only valid for the
802.1x user).
Note
1. To select the AAA service method list in the domain configuration mode, the
AAA service method list is defined before entering the domain configuration
mode. Or the configurations are inexistent when selecting the AAA method
list-name.
2. With the domain-name-based AAA service enabled, if there is no domain
information carried by the username, use the default domain; if there is no
configurations for the user domain in the system, the user is determined to be
illegal and provides no AAA service.
3. In the domain configuration mode, without the method list configured, use the
default method list in the system.