Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-4
length multiplied by the packet percent, the type of packets will be discarded.
12.2 Configuring NFPP
This section describes how to configure the NFPP.
Default NFPP configuration.
Configuring the packet traffic bandwidth.
Configuring the packet percent.
Anti-attack Protocols
12.2.1 Default NFPP
Configuration
The default configurations of NFPP are as follows:
Packet type
Default traffic bandwidth
Default packet percent
Manage
3000PPS
30
Route
3000PPS
25
Protocol
3000PPS
45
12.2.2 Configuring the
packet traffic
bandwidth
This section describes how to configure the packet traffic bandwidth:
Command Function
DES-7200(config)# cpu-protect
sub-interface {manage|protocol|route}
pps pps_vaule
Configure the traffic bandwidth threshold of the
corresponding packet, in pps, ranging from 1 to
8192, in integer.
For example:
DES-7200(config)# cpu-protect sub-interface manage pps 200
DES-7200(config)# end
12.2.3 Configuring the
packet percent
This section describes how to configure the packet percent:
Command Function