Filter
Top Products
DES-7200 Configuration Guide Chapter 8 Private VLAN Configuration
8-6
306 comm inactive Disabled 202
307 comm inactive Disabled 202
309 comm inactive Disabled 202
440 comm inactive Disabled 202
Note
This operation is performed in the configuration mode of the
VLAN declared as the primary VLAN.
8.2.4 Mapping
Secondary
VLANs to the
Layer 3
Interface of the
Primary VLAN
To map the secondary VLANs to the layer 3 interface of the primary VLAN,
execute the following commands:
Command Description
configure terminal
Enter the global configuration mode.
interface vlan p_vid
Enter the interface configuration mode
of the primary VLAN.
private-vlan mapping
{svlist | add svlist | remove svlist}
Map the secondary VLANs to the layer
3 SVI of the primary VLAN.
end
Exit the interface configuration mode.
The following example configures Secondary VLAN routing:
DES-7200# configure terminal
DES-7200(config)# interface vlan 202
DES-7200(config-if)# private-vlan mapping add 303-307,309,440
DES-7200(config-if)# end
DES-7200#
Note
The primary VLAN and the secondary VLANs in this process are
associated.