Filter
Top Products
DES-7200 Configuration Guide Chapter 2 RIP
Configuration
2-13
not completed within such invalid timer, the neighbor's routes won't be sent upon
expiration of invalid timer, thus causing the interruption of data forwarding.
Therefore, unless otherwise needed, it is not suggested to adjust the grace period.
If grace period is adjusted, please refer to the configuration of "timers basic"
command and make sure the grace period is larger than the update timer and
smaller than the invalid timer.
To enable or disable this feature, execute the following commands in RIP routing
process configuration mode:
Command Function
DES-7200(config-router)#
graceful-restart [grace-period
grace-period ]
Enable RIP Graceful Restart.
DES-7200(config-router)# no
graceful-restart [grace-period]
Disable RIP Graceful Restart.
2.3 RIP configuration examples
2.3.1 Configuring RIP Route and Defining RIP Version
Network Topology
Figure1 Configuring RIP routing and RIP version
Networking Requirements
A small-sized company runs a small office network, and requires network layer