Filter
Top Products
DES-7200 Configuration Guide Chapter 6 BGP
Configuration
6-64
Enuser that OSPF GR is configured on R2 successfully
DES-7200# show ip ospf
Routing Process "ospf 1" with ID 10.0.0.2
Process uptime is 4 minutes
Process bound to VRF default
Conforms to RFC2328, and RFC1583Compatibility flag isenabled
Supports only single TOS(TOS0) routes
Supports opaque LSA
This router is an ASBR (injecting external routing information)
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
LsaGroupPacing: 240 secs
Number of incomming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 4. Checksum 0x0278E0
Number of opaque AS LSA 0. Checksum 0x000000
Number of non-default external LSA 4
External LSA database is unlimited.
Number of LSA originated 6
Number of LSA received 2
Log Neighbor Adjency Changes : Enabled
Graceful-restart enabled
Graceful-restart helper support enabled
Number of areas attached to this router: 1
Area 0 (BACKBONE)
Here “Graceful restart enabled “means OSPF GR is configured successfully.
6.30.10 Configuring BGP Local AS
Network requirements
As shown in the following figure, Router A and the network it belogs to is located
in AS 23, which connects AS 3600 through EBGP. The route information of AS
5750 is transmitted to AS 3600 via AS 23.
Locial topology before AS migration