Filter
Top Products
DES-7200 Configuration Guide Chapter 3 MPLS Reliability Configuration
3-25
DES-7200(config-if-GigabitEthernet 2/1)#mpls ip
Router(config-if-GigabitEthernet 2/1)#exit
## Configurations on the router. You need to execute one more command: enable fast
forwarding.
DES-7200(config-if-GigabitEthernet 2/1)#mpls ip
DES-7200(config-if-GigabitEthernet 2/1)#ip ref
Router(config-if-GigabitEthernet 2/1)#exit
DES-7200(config)#interface gigabitEthernet 2/2
DES-7200(config-if-GigabitEthernet 2/2)#label-switching
## Configurations on the switch.
DES-7200(config-if-GigabitEthernet 2/2)#mpls ip
Router(config-if-GigabitEthernet 2/2)#exit
## Configurations on the router. You need to execute one more command: enable fast
forwarding.
DES-7200(config-if-GigabitEthernet 2/2)#mpls ip
DES-7200(config-if-GigabitEthernet 2/2)#ip ref
Router(config-if-GigabitEthernet 2/2)#exit
# Configure PE2. The configurations of PE2 are the same as that of PE1.
4) Configure LDP protocol so that the network can forward MPLS traffic.
# Configure PE1.
DES-7200#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200(config)#mpls router ldp
DES-7200(config-mpls-router)#ldp router-id interface loopback 0 force
# Configure P device.
DES-7200#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200(config)#mpls router ldp
DES-7200(config-mpls-router)#ldp router-id interface loopback 0 force
# Configure PE2.
DES-7200#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200(config)#mpls router ldp
DES-7200(config-mpls-router)#ldp router-id interface loopback 0 force