Filter
Top Products
DES-7200 Configuration Guide Chapter 5 OSPF
Configuration
5-6
Command Function
configure terminal
Enter the global configuration mode.
ipv6 router ospf process-id
Start the OSPFv3 route process and enter the
OSPFv3 configuration mode.
router-id router-id
Configure the Router ID for running the
OSPFv3.
interface interface-type interface-id
Enter the interface configuration mode.
ipv6 ospf process-id area area-id
[instance-id instance-id]
Enable the OSPFv3 on an interface.
instance-id: The OSPFv3 entity number that
the interface participates in. The interfaces of
different devices connecting a network select to
participate in different OSPFv3 entities.
copy running-config
startup-config
Save the configuration.
Note
The OSPFv3 instance ID and process ID are different. OSPFv3 process ID is
valid for the device itself only, not influencing the interaction with other router
devices. While the OSPFv3 instance ID influences the interaction with other
router devices. Only the devices with the same instance ID can set up the
OSPFv3 neighbor relationship.
Caution
In the interface configuration mode, first enable the interface to participate in
OSPFv3 and then configure the OSPFv3 process. After you configure the
OSPFv3 process, the interface will automatically participate in the appropriate
process.
DES-7200 product support up to 32 OSPFv3 processes.
5.2.2 Configuring OSPF Parameters on the Interface
In the interface configuration mode, you can modify the OSPF parameters of an
interface to meet practice application needs.
To configure OSPF parameters on the interface, execute the following commands
in the interface configuration mode:
Command Function
ipv6 ospf process-id area area-id
Configure the interface to participate in the