Filter
Top Products
DES-7200 Configuration Guide Chapter 4 OSPF
Configuration
4-4
Automatic cost calculation
Enabled automatically;
Default automatic cost is 100Mbps
Default route generation
Disabled
The default metric will be 1 and the type is type-2.
Default metric
(Default metric)
The default metric is used to redistribute the other
routing protocols;
Management Distance
Intra-area route information:110
Inter-area route information:110
External route information:110
Database filter
Disabled. All interfaces can receive the status update
message (LSA).
Neighbor change log Enabled
Neighbor N/A
Neighbor database filter
Disabled.
All outgoing LSAs are sent to the neighbor.
network area
(network area)
N/A
Device ID Undefined; the OSPF protocol does not run by default
Route summarization
(summary-address)
Undefined
Changing LSAs Group
Pacing
240 seconds
Shortest path first (SPF)
timer
The time between the receipt of the topology changes
and SPF-holdtime: 5 seconds
The least interval between two calculating operations:
10 seconds
Optimal path rule used to
calculate the external routes
Using the rules defined in RFC1583
OSPF overflow memory-lack
Enter the overflow state when the memory lacks.
GR restarter: disabled.
GR helper:enabled.
OSPFv2 MIB binding
In the OSPFv2 process in the smallest process
number.
OSPFv2 TRAP sending Disabled
4.2.1 Creating the OSPF Routing Process
This is to create the OSPF routing process and define the range of the IP