DES-7200 Configuration Guide Chapter 5 Port-based Flow Control Configuration
5-15
5.4.3 Showing the ARP Check
Entry on the interface
Use the following commands to show the ARP check entry information on the
interface:
Command Action
DES-7200#show interface
{ interface-type interface-number }
arp-check list
Show the ARP check entry information.
The example below shows the ARP check entry information:
DES-7200#show interfaces arp-check list
Interface Sender MAC Sender IP Policy Source
------------------------ ---------------- ---------------- --------------------
Gi 0/1 00D0.F800.0003 192.168.1.3 address-bind
Gi 0/1 00D0.F800.0001 192.168.1.1 port-security
Gi 0/4 192.168.1.3 port-security
Gi 0/5 00D0.F800.0003 192.168.1.3 address-bind
Gi 0/7 00D0.F800.0006 192.168.1.6 AAA ip-auth-mode
Gi 0/8 00D0.F800.0007 192.168.1.7 GSN