Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-83
Command Function
DES-7200#configure terminal
Enter global configuration mode.
DES-7200(config)#nfpp
Enter NFPP configuration mode.
DES-7200(config-nfpp)# define
name enable
Globally enable defined guard. By default,
defined guard is enabled on all ports.
DES-7200(config-nfpp)#end
Return to privileged mode.
DES-7200#configure terminal
Enter global configuration mode.
DES-7200(config)#interface
interface-name
Enter interface configuration mode.
DES-7200(config-if)#nfpp define
name enable
Enable defined guard attack on the port. By
default, the local switch is not configured on the
port, and the global switch will be adopted.
DES-7200(config-if)#end
Return to privileged mode.
DES-7200#show nfpp define
summary name
Verify configurations.
DES-7200#copy running-config
startup-config
Save configurations.
To disable defined guard, execute "no define name enable" command in NFPP configuration
mode to globally disable the feature of defined guard, or execute "no define name enable"
command in interface configuration mode to disable defined guard configured on the interface
(to restore defined guard on interface, enable defined guard globally).
Caution
When defined guard policy is not fully configured, the defined
guard cannot be enabled, and the system will remind the
user of the corresponding absent policy configurations.
When the name of defined attack doesn't exist, the following
prompting message will be displayed: "%ERROR: The name
is not exist."
When match type is not configured for the defined guard, the
following prompting message will be displayed: "%ERROR:
name (name of defined guard) doesn't match any type."
When the policy is not configured for the defined guard, the
following prompting message will be displayed: "%ERROR:
name (name of defined guard) doesn't specify any policy."
12.9.1.10 Clearing Monitored Hosts
Isolated hosts will be released after certain period. To manually clear this host, the
administrator can execute the following commands in the privileged mode.