Filter
Top Products
DES-7200 Configuration Guide Chapter 5 OSPF
Configuration
5-21
ipv6 ospf 10 area 0
！
ipv6 router ospf 10
router-id 2.2.2.2
SwitchC
vlan 200
！
interface VLAN 200
no ip proxy-arp
ipv6 address 3001:1::2/64
ipv6 enable
ipv6 ospf 10 area 1
！
ipv6 router ospf 10
router-id 3.3.3.3
Step 2: Display OSPFv3 neighbors Key point: whether the adjacencies have been
created.
SwitchA#show ipv6 ospf neighbor
OSPFv3 Process (10), 2 Neighbors, 2 is Full:
Neighbor ID Pri State Dead Time Instance ID Interface
2.2.2.2 1 Full/BDR 00:00:37 0 VLAN 100
3.3.3.3 1 Full/DR 00:00:34 0 VLAN 200
The information displayed on SwitchB and SwitchC is the same as the
information displayed on SwitchA.
Step 3: Display OSPFv3 routes and ping IPv6 address in another area. Key point:
whether all IPv6 routes and routes learned can be pinged.
SwitchC#show ipv6 route
IPv6 routing table name is Default(0) global scope - 7 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra area, OI - OSPF inter area, OE1 - OSPF external type
1, OE2 - OSPF external type 2
ON1 - OSPF NSSA external type 1, ON2 - OSPF NSSA external type 2
[*] - NOT in hardware forwarding table
L ::1/128 via Loopback, local host
OI 3001::/64 [110/2] via FE80::21A:A9FF:FE15:4CB9, VLAN 200
C 3001:1::/64 via VLAN 200, directly connected
L 3001:1::2/128 via VLAN 200, local host
L FE80::/10 via ::1, Null0
C FE80::/64 via VLAN 200, directly connected
L FE80::21A:A9FF:FE01:FB1F/128 via VLAN 200, local host