Filter
Top Products
DES-7200 Configuration Guide Chapter 1 WEB Management Configuration
Figure 1-46 WEB Port setting
Configuration description:
Enter the valid port number and click Save to validate the configuration. After the port
number is set, log in to the device using the new port. For example, if the new port is 8080
and the IP address of the device is 192.168.1.1, log in to the device through
http://192.168.1.1:8080. In order to recover the default port, click Use the default port and
then re-log in through http://192.168.1.1.
1.3.6.7 System Upgrade
Use the System Upgrade menu item to enable the function.
System upgrade page
Figure 1-47 Upgrade system
Configuration description:
In order to upgrade the system, make sure that the TFTP server is enabled. The source file
name is the name of the file to be upgraded on the TFTP server and the target file name is
1-39