Filter
Top Products
DES-7200 Configuration Guide Chapter 1 AAA Configuration
1-20
Command Function
username name [password password]
Establish the local username and set the
password.
username name [privilege level]
Set the user privilege level. (Optional)
end
Return to the privileged mode.
show running-config
Confirm the configuration.
To define the local Exec authorization method list, run the following commands:
Command Function
configure terminal
Enter the global configuration mode.
aaa new-model
Turn on the AAA switch.
aaa authorization exec {default |
list-name} local
Define the local method list.
end
Return to the privileged mode.
show aaa method-list
Confirm the configured method list.
configure terminal
Enter the global configuration mode.
line vty line-num
Enter the line configuration mode.
authorization exec {default | list-name}
Apply the method list.
end
Return to the privileged mode.
show running-config
Confirm the configuration.
1.4.4.2 Using Radius for exec
authorization
To configure the use of RADIUS server for Exec authorization, it is required to first
configure the RADIUS server. For the details of the RADIUS server configuration, see
Configuring RADIUS.
After configuring the RADIUS server, the RADIUS server-based method list can be
configured. Run the following commands in the global configuration mode:
Command Function
configure terminal
Enter the global configuration mode.
aaa new-model
Turn on the AAA switch.
aaa authentication enable {default |
list-name} group radius
Define RADIUS authentication method.
end
Return to the privileged mode.
show aaa method-list
Confirm the configured method list.