Filter
Top Products
DES-7200 Configuration Guide Chapter 6 RSPAN
Configuration
6.4.2 Exam fi
RSPAN supporting reflector
port
ple of con guring
6.4.2.1 Topological Diagram
for RSPAN supporting reflector port
6.4.2.2 App
Application topology
lication Requirements
Achieve one-to-many remote SPAN, namely both PC1 and PC2 can monitor
6.4.2.3 Con
the traffic sent and received on the service through remote SPAN.
figuration Tips
1. Create Remote VLAN on all associated devices (Switch A, B and C).
2. Configure the server-connecting device (Switch A) as RSPAN sourc
e device
C-connecting ports (Fa 0/2) as RSPAN
as Trunk
and configure the server-connecting port (Fa 0/1) as RSPAN source port;
configure one port (Fa 0/2) in Down state as the reflector port.
3. Configure the PC-connecting devices (Switch B and Switch C) as RSPAN
destination device and configure the P
destination port.
4. The ports interconnecting devices are only needed to be configured
port, which by default can forward the RSPAN traffic in Remote VLAN.
6-14