Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
common login messages. By default, the MOTD and login banner are not
configured.
2.7.2 Conf
Message-of-the-Day
iguring a
You can create a notification of single
a user logs in the switch. To configu
following commands in the global conf
or multi-line messages that appears when
re the message of the day, execute the
iguration mode:
Command Function
DES-7200(Config)# banner motd c
ress Enter to
complete the type. Note that if you type additional
ters will be
discarded by the system. Also note that you cannot use
age length
Specify the message of the day, with c being the delimiter,
for example, a pound sign (&). After inputting the delimiter,
press the Enter key. Now, you can start to type text. You
need to input the delimiter and then p
message c
characters after the end delimiter, these charac
the delimiter in the message and the mess
should be no more than 255 bytes.
To delete the MOTD, use the no banner motd command in the global
amp ure a MOTD.
ll
motd # //Start delimiter.
Enter TEXT message. End with the character '#'.
ll shutdown on July 6th.# //End delimiter.
DES-7200(config)#
2.7.3 Configuring a Login Banner
configuration mode. The following ex le describes how to config
The # symbol is used as the delimiter, and the text is “Notice: system wi
shutdown on July 6th.”
DES-7200(config)# banner
Notice: system wi
To configure a login banner, executing the following commands in the global
configuration mode:
Command Function
DES-7200(Config)# banner login c
message c
being the
nputting the
delimiter, press the Enter key. Now, you can start to type
text. You need to input the delimiter and then press Enter
to complete the type. Note that if you type additional
characters after the end delimiter, these characters will be
discarded by the system. Also note that you cannot use
the delimiter in the text of the login banner and the text
length should be no more than 255 bytes.
Specify the text of the login banner, with c
delimiter, for example, a pound sign (&). After i
2-12