Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-29
12.4.10 Showing
ip-guard
Showing ip-guard configuration
Showing monitored host configuration
Showing trusted host configuration
12.4.10.1 Showing ip-guard configuration
Use this command to show the ip-guard configurations.
Command Function
DES-7200# show nfpp ip-guard summary
Show the ip-guard configurations.
For example,
DES-7200# show nfpp ip-guard summary
（Format of column Rate-limit and Attack-threshold is per-src-ip/per-src-m
ac/per-port.）
Interface Status Isolate-period Rate-limit Attack-threshold Scan-thresho
ld
Global Enable 300 4/-/60 8/-/100 15
G 0/1 Enable 180 5/-/- 8/-/- -
G 0/2 Disable 200 4/-/60 8/-/100 20
Maximum count of monitored hosts: 1000
Monitor period：300s
Note
Field Description
Interface Global refers to the global configuration.
Status Enable/disable the arp-guard.
Rate-limit In the format of source IP address-based
rate-limit threshold / source MAC address-based
rate-limit threshold / port-based rate-limit
threshold.
Attack-threshold In the same format of the Rate-limit.
- No configuration.