Filter
Top Products
DES-7200 Configuration Guide Chapter 4 802.1x Configuration
4-60
DES-7200(config-if-FastEthernet 0/24)#switchport mode trunk
! Configure the default route of device
DES-7200(config)#ip route 0.0.0.0 0.0.0.0 192.168.217.1
! Configure the IP address of device
DES-7200(config)#interface vlan 1
DES-7200(config-if-VLAN 1)#ip address 192.168.217.81 255.255.255.0
Step 3: Use client to complete authentication. After successful authentication, the CLI will
display: "%DOT1X-4-TRANS_AUTHOR: Setting interface FastEthernet 0/1 author-vlan 2
succeeded."
We can see that the user has been assigned to VLAN2.
4.5.2.5 Verify Configurations
Step 1: Display the authentication state information of current user to see the true VLAN to
which the user belongs.
DES-7200#show dot1x summary
ID MAC Interface VLAN Auth-State Backend-State
Port-Status User-Type
-------- -------------- --------- ---- --------------- -------------
----------- ---------
5 00d0.f864.6909 Fa0/1 2 Authenticated Idle Authed
static
Step 2: Display detailed information about authenticated user.
DES-7200#show dot1x user id 5
User name: st
User id: 5
Type: static
Mac address is 00d0.f864.6909
Vlan id is 2
Access from port Fa0/1
Time online: 0days 0h 4m35s
User ip address is 192.168.217.82
Max user number on this port is 6000
Authorization vlan is 2
Authorization session time is 20731685 seconds
Supplicant is private
Start accounting
Permit proxy user
Permit dial user
IP privilege is 0
user acl-name st_1_0_0 :