Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuration File Management
2-2
2.1.2.2 Configuration File Comparison
The configuration file comparison function allows line-by-line configuration information
co n configuration files, and will output the configuration
information which only exists in one of two configuration files. Through this function, the
mpariso between two specified
user can intuitively view added and deleted configuration information on the terminal.
2.1.3 Working Principle
By tracking each command applied, the system will log the corresponding user name,
corresponding time, commands configured, configuration mode and etc, and then send
ncludes added and
deleted configuration information: "+" mark for added information and "-" mark for deleted
rence between the specified configuration file and the
adde
Prem
configuration file (i.e., it can be used as the boot-up configuration file after being
d into system flash).
2) The system memory must be larger than the size of two specified configuration files.
2.1.4 Protocol
the log to the remote log server through the notification mechanism. By looking up these
records, we will understand whether the configurations have been changed, what the
changes are and which user made such change.
There are two ways of configuration file comparison: 1) comparing the difference between
two specified configuration files (the output difference information i
information); 2) comparing the diffe
existing configurations running on the device (the output difference information is the
d configuration information in the specified configuration file).
ises for using this function:
1) The format of the specified configuration file must meet the format requirements for
loade
Specification
NA
2.2 Configurations Default
The following table describes the default configurations of configuration file management.
Function Default setting
Configuration change logging Disabled
Configuration change notification Disabled
E tries reserved in the configuration lon g 100