Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-86
12.10 NFPP Syslog
12.10.1 NFPP Syslog
Overview
A NFPP log is generated in the NFPP syslog buffer area after detecting the attack. Use the
NFPP log to generate the syslog at the specified rate and delete the NFPP log from the NFPP
syslog buffer area.
NFPP syslog configuration commands include:
Configuring NFPP log-buffer entry number
Configuring the rate of generating NFPP syslog
Configuring NFPP log filtering
Clearing NFPP syslog
Showing NFPP syslog
12.10.2 Configuring
NFPP
log-buffer entry
number
The administrator can configure the NFPP log-buffer entry number in the nfpp configuration
mode.
Command Function
DES-7200# configure terminal
Enter the global configuration mode.
DES-7200(config)# nfpp
Enter the nfpp configuration mode.
DES-7200(config-nfpp)# log-buffer entries
number
Configure the NFPP log-buffer area
size(in the range of 0-1024), 256 by
default.
DES-7200(config-nfpp)# end
Return to the privileged EXEC mode.
DES-7200# show nfpp log summary
Show the configurations.
12.10.3 Configuring the
rate of generating
NFPP syslog
The administrator can configure the rate of generating the NFPP syslog in the nfpp
configuration mode.