Filter
Top Products
Preface
Version Description
This manual matches the firmware version 10.4(3).
Target Readers
This manual is intended for the following readers:
z Network engineers
z Technical salespersons
z Network administrators
Conventions in this Document
1. Universal Format Convention
Arial: Arial with the point size 10 is used for the body.
Note: A line is added respectively above and below the prompts such as caution and note to separate them
from the body.
Format of information displayed on the terminal: Courier New, point size 8, indicating the screen output.
User's entries among the information shall be indicated with bolded characters.
2. Command Line Format Convention
Arial is used as the font for the command line. The meanings of specific formats are described below:
Bold: Key words in the command line, which shall be entered exactly as they are displayed, shall be
indicated with bolded characters.
Italic: Parameters in the command line, which must be replaced with actual values, shall be indicated with
italic characters.
[ ]: The part enclosed with [ ] means optional in the command.
{ x | y | ... }: It means one shall be selected among two or more options.
[ x | y | ... ]: It means one or none shall be selected among two or more options.
//:Lines starting with an exclamation mark "//" are annotated.
3. Signs
Various striking identifiers are adopted in this manual to indicate the matters that special attention should
be paid in the operation, as detailed below:
Caution
Warning, danger or alert in the operation.
Note
Descript, prompt, tip or any other necessary supplement or explanation
for the operation.
iii