Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-81
DES-7200(config-nfpp)#define
name
Enter NFPP defined guard configuration mode
DES-7200(config-nfpp-define)#
define-policy per-port
rate-limit-pps attack-threshold-pps
Configure host-based rate-limiting threshold
and attack threshold.
per-port means to take data rate statistics as
per the physical port receiving packets.
Rate-limit-pps means the rate-limiting
threshold (1-9999). By default, no rate limiting
will be implemented. Packets exceeding the
rate-limiting threshold will be discarded.
Attack-threshold-pps means the attack
threshold (1-9999). When the packets of
defined type exceed the attack threshold, an
attack is considered existing and will be
logged. The traps will be sent and the user will
be isolated as per the isolation period
configured.
By default, the globally configured rate-limiting
threshold and attack threshold will be used.
The attack threshold must be greater than or
equal to the rate-limiting threshold.
DES-7200(config-nfpp)#end
Return to privileged mode.
DES-7200#configure terminal
Enter global configuration mode.
DES-7200(config)#interface
interface-name
Enter interface configuration mode.