Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-64
ND-guard configuration commands include:
Enabling ND-guard
Port-based rate-limit and attack detection
Showing related dhcpv6-guard information
12.8.2 Enabling
ND-guard
You can enable ND-guard in the nfpp configuration mode or in the interface configuration
mode. By default, the ND-guard is enabled.
Command Function
DES-7200# configure terminal
Enter the global configuration mode.
DES-7200(config)# nfpp
Enter the nfpp configuration mode.
DES-7200(config-nfpp)# nd-guard enable
Enable the nd-guard. By default, nd-guard is
enabled.
DES-7200(config-nfpp)# end
Return to the privileged EXEC mode.
DES-7200# configure terminal
Enter the global configuration mode.
DES-7200# interface interface-name
Enter the interface configuration mode.
DES-7200(config-if)# nfpp nd-guard
enable
Enable the nd-guard on the interface. By default,
nd-guard is not enabled on the interface.
DES-7200(config-if)# end
Return to the privileged EXEC mode.
DES-7200# show nfpp dhcpv6-guard
summary
Show the configurations.
DES-7200# copy running-config
startup-config
Save the configurations.
Caution
With the nd-guard disabled, the monitored hosts are
auto-cleared.