Filter
Top Products
DES-7200 Configuration Guide Chapter 6 Syslog Configuration
6-2
6.2 Log Configuration
6.2.1 L og Switch
T default. If it is turned off, the device will not print log
in send log in g server, or record
the log information in the related media (memory buffer, flash).
To turn on or off the log switch, run the
he log switch is turned on by
formation in the user window, or formation to the syslo
following command in the global configuration
mode:
Command Function
DES-7200(config)# logging on
Turn on the log switch
DES-7200(config)# no logging on
Turn off the log switch
Do not turn off the log switch in general case. If it prints too much
Caution
information, you can reduce it by setting different displaying levels for
device log information.
6.2.2 Configuring the Device
Displaying the Log
Information
When the log switch is turned on, the log information will be displayed on the console
a ying devices. s
fo ing comman r
privileged level:
nd also sent to different displa To configure different displaying device
r receiving logs, run the follow ds in the global configuration mode o
Command Function
DES-7200(config)# logging buffered
[buffer-size | level]
Record log in memory buffer
DES-7200# termninal monitor
Allow log to be displayed on VTY window
DES-7200(config)# logging host
Send log information to the syslog sever in
the network
DES-7200(config)# logging file
flash:filename [max-
Record log on extended FLASH
file-size] [level]
Logging Buffered will record log information in the memory buffer. The memory buffer
for log is used in recycled manner. That is, when it is full, the oldest information will be
overwritten. To show the log information in the memory buffer, ru
n show logging at
the privileged user level. To clear the log information in the memory buffer, run clear
logging at the privileged user level.