Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
idle time exceeds the set value and th input or output, this connection
will be interrupted.
2.11.2 Connection Timeout
ere is no
When there is no information traveling through an accepted connection within a
specified time, the server will interrupt this connection.
Our products provide
commands to configure the connection timeout in the line
configuration mode.
Command Func ion t
DES-7200(Config-line)#exec-timeout
20
Configure the timeout for the accepted conne
the configured time is due and there is no inp
ction. When
ut, this
connection will be interrupted.
The connection tim
command in the line configuration m
DES-7200# configure termina
eout setting can be removed by using the no exec-timeout
ode.
l //Enter the global configuration
2.11.3 Sessio
mode.
DES-7200# line vty 0 //Enter the line configuration mode
DES-7200(config-line)#exec-timeout 20 //Set the timeout to 20min
n Timeout
When there is no input for the session established with a remote terminal over
the current line within the specified time, the session will be interrupted and the
remote terminal becomes idle.
D provides commands in the ode to configure the
ssion set up with the remote terminal.
ES-7200 line configuration m
timeout for the se
Command Function
DES-7200(Config-line)#session-time
Configure the timeout for the session set up with the
remote terminal over the line. If there is no input within the
specified time, this session will be interrupted.
out 20
The timeout setting for the session set up with the remote terminal over the line
ut command in the line
//Enter the global configuration
guration
//Set the session timeout to
can be removed by using the no exec-timeo
configuration mode.
DES-7200# configure terminal
mode.
DES-7200(config)# line vty 0 //Enter the line confi
mode
DES-7200(config-line)# session-timeout 20
20min
2-17