Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
Command Function
DES-7200(Config)# enable service
snmp-agent
Enable SNMP Server.
DES-7200(Config)# enable service
ssh-sesrver
Enable SSH Server.
DES-7200(Config)# able service
telnet-server
en
Telnet Server
Enable
Enable Http Server.
DES-7200(Config)# enable service web-server
In the configuration mode, you can use the n
disable corresponding services.
2.14 Setti
Para
o enable service command to
DES-7200# configure terminal //Enter the global
configuration mode.
DES-7200(config)# enable service ssh-server //Enable SSH Server
ng HTTP
meters
When using the integrated Web for management, you can adjust HTTP
n
parameters, and specify service port or login authe tication method.
Command Function
DES-7200(Config)# ip http port number
Specify HTTP se
rvice port, 80 by default.
Set Web l
DES-7200(Config)# ip http authentication
{enable | local}
password or enable secret com
authentication, where the password m
ogin authentication method, enable
enable: Use the password set by the enable
mand for
ust be 15
levels.
nd password set by
the username command for authentication,
ith 15-level
by default.
local: Use the username a
where the user must be bound w
right.
In the configuration mode, you can u
he fo
se the no form of the command to restore
llowing example enables the HTTP Server,
nd uses the local username for login
nal //Enter the global
configuration mode.
DES-7200(config)# enable service web-server http //Enable http Server
DES-7200(config)# username name password pass //Set local user
DES-7200(config)# username name privilege 15 //Bind user right
DES-7200(config)# ip http port 8080 //Set service port
the setting to the default value. T
8080, a
sets the service port to
authentication.
DES-7200# configure termi
2-19