Filter
Top Products
DES-7200 Configuration Guide Chapter 12 QinQ Configuration
12-20
----------------------------------------------
Gi0/1 5 1-3
12.2.6 Configuring Transparent
Transmission of L2
Protocol Packets
Configure transparent transmission of STP protocol packets
Configure transparent transmission of GVRP protocol packets
Configure transparent transmission address
12.2.6.1 Configuring Transparent
Transmission of STP Protocol
Packets
In the privileged mode, you can configure transparent transmission of STP protocol
packets by the following steps:
Command Description
configure terminal
Enter the global configuration mode.
l2protocol-tunnel stp
Configure to enable transparent transmission of
STP protocol packets globally.
interface interface-id
Enter the interface configuration mode.
l2protocol-tunnel stp enable
Enable transparent transmission of STP protocol
packets on the interface.
show l2protocol-tunnel stp
View the configuration.
An example below shows how to enable transparent transmission of STP protocol
packets:
DES-7200# configure
DES-7200(config)# l2protocol-tunnel stp
DES-7200(config)# interface fa 0/1
DES-7200(config-if)# l2protocol-tunnel stp enable