Filter
Top Products
DES-7200 Configuration Guide Chapter 2 VRRP Plus Configuration
2-9
DES-7200(config-if)# no vrrp group
forwarder preempt
Disable forwarder preemption
Forwarder preemption is enabled by default.
2.4.8 Configure weighting tracking
object for VRRP Plus
backup group
Allowing dynamic adjustment of the weighting of backup group according to
link detection status.
Command Function
DES-7200(config-if)# vrrp group weighting
track object-number [decrement value]
Configure weighting tracking object for
VRRP Plus backup group
DES-7200(config-if)# no vrrp group
weighting track object-number
Delete the corresponding tracking object
Tracking is not configured by default.
Object-number is the number of tracked object (selecting between 1 and 700).
For details about track object configuration, you can refer to track function
related documents, such as "TRACK-RNS-CREF.doc" and
"TRACK-RNS-SCG.doc".
Value indicates the weighting value decreased when the tracked object is
down (default: 10, selecting between 1 and 255).
2.5 VRRP Plus Monitoring
and Maintenance
2.5.1 debug vrrp balance
Add the following debug switches for VRRP Plus module:
debug vrrp balance errors Monitor error messages
debug vrrp balance messages Monitor messages between VRRP and
TRACK module
debug vrrp balance packets Monitor packets of VRRP Plus protocol
debug vrrp balance state Monitor the status of VRRP Plus group
debug vrrp balance timer Monitor the timer messages of VRRP Plus
group
debug vrrp balance event Monitor the events of VRRP Plus group
debug vrrp balance Monitor all messages