Filter
Top Products
DES-7200 Configuration Guide Chapter 9 Share VLAN Configuration
9-6
hybrid port (default VLAN is 3, and the allowed UNTAG VLANs include VLAN 3
and VLAN 10); configure G0/1 as a hybrid port (default VLAN is 2, and the
allowed UNTAG VLANs include all vlans).
DES-7200(config)#interface gigabitEthernet 0/2
DES-7200(config-GigabitEthernet 0/2)#switchport mode hybrid
DES-7200(config-GigabitEthernet 0/2)#switchport hybrid native vlan 2
DES-7200(config-GigabitEthernet 0/2)#switchport hybrid allowed vlan untagged
2,10
DES-7200(config)#interface gigabitEthernet 0/3
DES-7200(config-GigabitEthernet 0/3)#switchport mode hybrid
DES-7200(config-GigabitEthernet 0/3)#switchport hybrid native vlan 3
DES-7200(config-GigabitEthernet 0/2)#switchport hybrid allowed vlan untagged
3,10
DES-7200(config-GigabitEthernet 0/1)#switchport mode hybrid
DES-7200(config-GigabitEthernet 0/1)#switchport hybrid native vlan 10
DES-7200(config-GigabitEthernet 0/1)#switchport hybrid allowed vlan untagged
1-4094
2. On SwitchA, configure VLAN 10 as the SHARE VLAN;
DES-7200(config)#vlan 10
DES-7200(config-vlan)#share
9.5.1.5 Verification
Step 1: PC1 (assuming that its IP address is 192.168.12.4) shall be able to ping
the server (assuming that its IP address is 192.168.12.6);
Step 2: View the information about SHARE VLAN on SwitchA;
DES-7200(config-vlan)#show vlan
VLAN Name Status Ports
---- -------- ------- --- --------------------------------
1 VLAN0001 STATIC Gi0/1, Gi0/2, Gi0/3, Gi0/4
Gi0/5, Gi0/6, Gi0/7, Gi0/8
Gi0/9, Gi0/10, Gi0/11, Gi0/12
Gi0/13, Gi0/14, Gi0/15, Gi0/16
Gi0/17, Gi0/18, Gi0/19, Gi0/20
Gi0/21, Gi0/22, Gi0/23, Gi0/24
2 VLAN0002 STATIC Gi0/1, Gi0/2, Gi0/3
3 VLAN0003 STATIC Gi0/1, Gi0/2, Gi0/3
10 VLAN0010 SHARE Gi0/1, Gi0/2, Gi0/3
Step 3: View MAC address status on SwitchA (only display the information of
port 2; other ports are omitted):
DES-7200(config)#show mac-address-table share
Vlan MAC Address Type Interface Status
---- -------------- ------- ------------------- ----------