Filter
Top Products
DES-7200 Configuration Guide Chapter 2 IPv6 Configuration
2-22
Command Meaning
DES-7200(config-if)#ipv6 nd
ra-interval {seconds min-max
min_value max_value}
(Optional) Set the time interval for the router to
send the router advertisement (RA) message
periodically, in second, and the default value is
200s.
With the min-max specified, the actual interval of
the message sending is a random value between
the minimum and maximum value. Without the
min-max specified, the actual interval of the
message sending is approximately 1.2/0.8*the
configured value.
DES-7200(config-if)#ipv6 nd
managed-config-flag
(Optional) Set the “managed address
configuration” flag bit of the router advertisement
(RA) message, and determine whether the host
will use the stateful auto-configuration to obtain
the address when it receives this router
advertisement (RA).
By default, the flag bit is not configured for the
router advertisement (RA) message.
DES-7200(config-if)#ipv6 nd
other-config-flag
(Optional) Set the “other stateful configuration”
flag bit of the router advertisement (RA)
message, and determine whether the host will
use the stateful auto-configuration to obtain other
information other than the address when it
receives this router advertisement (RA).
By default, the flag bit is not configured for the
router advertisement (RA) message.
DES-7200(config-if)#ipv6 nd
suppress-ra
(Optional) Set whether suppress the router
advertisement (RA) message in this interface.
By default, the flag bit is not configured for the
router advertisement (RA) message.
DES-7200(config-if)#end
Return to the privileged EXEC mode.
DES-7200#show ipv6 interface
[interface-id] [ra-info]
Show the ipv6 interface of the interface or the
information of RA sent by this interface.