Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
Command Purpose
DES-7200(config)# enable secret [level
Set the security password, which has the same
orithm than
curity, it is
.
level] {encryption-type
encrypted-password}
function but better password encryption alg
the static password. For the purpose of se
recommended to use the security password
DES-7200# enable [level], and
Switch over between user levels. To s
DES-7200# disable [level]
lower level to a higher level, you need to inp
password for the higher level.
witch over from a
ut the
During the process of setting a password, the keyword "level" is used to define
the password for a specified privileged level. After setting, it is only applicable
2.2.4 Configuring Multiple
Privileged Levels
for the users who are at that level.
By default, the system has only two password-protected levels: normal user
l
levels of commands for each mode. By configuring different passwords at
d ls, you can use different sets ds by different levels.
W the privil
privileged mode without password au e
recommended to set the password for the
2.2.4.1 Configuring Command
Authorization
(level 1) and privileged user (level 15). You can configure up to 16 hierarchica
ifferent leve of comman
hen no password is set for eged user level, you can enter the
thentication. For security, you ar
privileged user level.
T mand,
l u
assign it to the users at higher level.
You can use the following commands to a
o expand the usage range of a com
ower level. On contrary, to narrow the
you can assign it to the users at
sage range of a command, you can
uthorize users to use a command:
Command Purpose
Enter the global configuration mode.
DES-7200# configure terminal
2-3