Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
To delete the lo
configuratio
gin banner, use the no banner login command in the global
n mode.
The following example shows how to configure a login banner. The pound sign
sed as the starting and end delimiters and the text of the login banner is
"Access for authorized users only. Please enter your password."
Access for authorized users only. Please enter your password.
//End delimiter
config)#
2.7.4 Displ
(#) is u
DES-7200(config)# banner login # //Start delimiter
Enter TEXT message. End with the character '#'.
#
DES-7200(
aying a Banner
A banner is displayed when you log in the network device. See the following
example:
C:\>telnet 192.168.65.236
tem will shutdown on Ju
As you can see, “Notice: system will shutdown on July 6th." is a MOTD banner
s for auth
banner.
2.8 Viewing System
Information
Notice: sys ly 6th.
Access for authorized users only. Please enter your password.
User Access Verification
Password:
and "Acces orized users only. Please enter your password." is a login
2.8.1 Overview
You view mmand on the
command-line interface, such as version, device information, and so on.
2.8.2 Viewing System Information
some system information with the show co can
and Version
System information consists of description, power-on time, hardware version,
software version, BOOT-layer software version, CTRL-layer software version,
and so on. System information helps you know the system You can show the
system information with the following commands in the privileged mode.
Command Function
DES-7200# show version
Show system information.
2-13