Filter
Top Products
DES-7200 Configuration Guide Chapter 4 MLD
Configuration
4-12
4.3.3 Display the state of listeners on the attached subnetwork
To display the state of all listeners on the attached subnetwork, run the following
commands in the privilege mode:
Command Function
DES-7200# show ipv6 mld groups
Display the information of all listeners
learned by MLD.
DES-7200# show ipv6 mld groups
detail
Display the detailed information of all
listeners learned by MLD.
DES-7200# show ipv6 mld groups
x:x:x:x::x
Display the information of
group-specific listeners learned by
MLD.
DES-7200# show ipv6 mld groups
x:x:x:x::x
detail
Display the detailed information of
group-specific listeners learned by
MLD.
DES-7200# show ipv6 mld
ssm-mapping
Display the configuration information
of ssm-mapping.
DES-7200# show ipv6 mld
ssm-mapping x:x:x:x::x
Display the source address mapping
information of specific group.
DES-7200# show ipv6 mld groups
interface-type detail
Display the detailed information of all
groups on the specific interface.
DES-7200# show ipv6 mld groups
interface-type x:x:x:x::x
Display the information of specific
groups on the specific interface.
DES-7200# show ipv6 mld groups
interface-type x:x:x:x::x detail
Display the detailed information of
specific groups on the specific
interface.
4.3.4 Display the configuration information of MLD interface
To display the configuration information of MLD interface, run the following
commands in the privilege mode:
Command Function
DES-7200# show ipv6 mld
interface interface-type
interface-number
Display the MLD interface
configurations.
DES-7200# show ipv6 mld
interface
Display the configurations of all MLD
interfaces.
4.3.5 Display the on/off state of MLD debug switch
To display the on/off state of MLD debug switch, run the following command in the
privilege mode:
Command Function
DES-7200# show debugging
Display the on/off state of MLD debug
switch.