Filter
Top Products
DES-7200 Configuration Guide Chapter 4 LINE Mode Configuration
4.2.3 Configuring the Protocols to
Communicate on the Line
T unication protocol type sup
this command. By default, a VTY supports the
w ication o col.
o restrain the comm ported on the line, you can use
communication of all protocols
f any proto
hile a TTY do not support the commun
Command Description
configure terminal
guration mode.
Enter the confi
Enter the line configuration mode.
line vty line number
transport input {all | ssh | telnet | none}
Configure the protocol to communicate on the
line.
no transport input
the line.
Disable the communication of any protocol on
default transport input
Restore the setting to the default val
ue.
4.2.4 Configuring the Access
Control List on the Line
T ess control list on the line,
d d on th
outgoin
o configure the acc you can use the command. By
efault, no access control list is configure e line.That is, all incoming and
g connections are permitted.
Command Description
configure terminal
Enter the configuration mode.
line vty line number
Enter the line configuration mode.
access-class access-list-number {in | out}
Configure the access control list on the line.
no access-class access-list-number {in | out}
Remove the configuration.
4-2