DES-7200 Configuration Guide Chapter 6 Super VLAN Configuration
6-6
6.7 Showing Super VLAN
Setting
To show the super VLAN setting, execute the following command.
Command Function
DES-7200# show supervlan
Show the super VLAN setting.
6.8 Typical Super
Configuration Example
6.8.1 Network Topology
Super VLAN application topology
6.8.2 Application
Requirements
As shown above, Switch A is the convergence device connecting with access
devices of Switch B, Switch C and Switch D on the Trunk ports.
Application requirements include:
z Layer-2 isolation of access users can be achieved through VLAN division.
z Users belonging to different VLANs share a same IP gateway, allowing
layer-3 communication and communication with Internet.