Filter
Top Products
DES-7200 Configuration Guide Chapter 6 Syslog Configuration
6-5
Command
u
nction
DES-7200(config-line)#
logging synchronous
Set synchronization between user input and log output.
DES-7200(config)# no
Delete synchronization between user input and log output.
logging synchronous
6.2.8 Configuring Log Rate Limit
B ure log rate limit in the
global configuration mode:
y default, log rate is not limited. Use this command to config
Command
u
nction
DES-7200(config)# logging rate-limit
Set log rate limit.
number
DES-7200(config)# no logging rate-limit
Delete the setting of log rate limit.
6.2.9 Configuring the Log
Information Displaying Level
To limit the number of log messages displayed on different devices, it is possible to set
the severity level of log information that is allo displayed on those devices.
T g l in the
global configuration mode:
wed to be
o configure the log information displayin evel, run the following command
Command Function
DES-7200(config)# logging console level
at is Set the level of log information th
allowed to be displayed on the console
DES-7200(config)# logging monitor level
Set the level of log information that is
allowed to be displayed on the VTY
window (such as telnet window)
DES-7200(config)# logging buffered
ffer [buffer-size | level]
Set the level of log information that is
allowed to be recorded in memory bu
DES-7200(config)# logging file
Set the level of log information th
flash:filename [max-file-size] [level]
at is
allowed to be recorded in extended flash
DES-7200(config)# logging trap level
of log information that is
Set the level
allowed to be sent to syslog server
The log information of ou roducts is clr p assified into the following 8 levels: