Filter
Top Products
DES-7200 Configuration Guide Chapter 3 Aggregate Port
Configuration
3-7
3.3 Showing an Aggregate
Port
In the privileged mode, show the AP configuration by performing the following
steps.
Command Function
DES-7200# show
aggregateport
[port-number]{load-balance |
summary}
Show the AP settings.
DES-7200# show aggregateport load-balance
Load-balance : Source MAC address
DES-7200# show aggregateport 1 summary
AggregatePort MaxPorts SwitchPort Mode Ports
------------- -------- ---------- ------
Ag1 8 Enabled ACCESS