Filter
Top Products
DES-7200 Configuration Guide Chapter 4 802.1x Configuration
4-56
DES-7200(config)#dot1x accounting jizhang
! Configure accounting update
DES-7200(config)#aaa accounting update
! Configure the accounting update interval as 15 minutes
DES-7200(config)#aaa accounting update periodic 15
! Configure the reply timeout timer of Radius Server as 5s
DES-7200(config)#dot1x timeout server-timeout 5
! Configure maximum transmission retries as 6 times
DES-7200(config)#dot1x max-req 6
! Enable periodic re-authentication
DES-7200(config)#dot1x re-authentication
! Configure the re-authentication interval as 1000s
DES-7200(config)#dot1x timeout re-authperiod 1000
! Configure the Quiet Period of device as 500s
DES-7200(config)#dot1x timeout quiet-period 500
! Configure the maximum authentication retries of device as 5 times
DES-7200(config)#dot1x reauth-max 5
! Configure the default route of device
DES-7200(config)#ip route 0.0.0.0 0.0.0.0 192.168.217.1
! Configure the IP address of device
DES-7200(config)#interface vlan 1
DES-7200(config-if-VLAN 1)#ip address 192.168.217.81 255.255.255.0
Step 3: Use authentication client (such as supplicant) to carry out authentication; type in the
correct username and password and select the network adapter, and the authentication will
succeed after a few seconds.
4.5.1.5 Verify Configurations
Step 1: Display the authentication state information of current user in order to eliminate faults.
DES-7200#show dot1x summary
ID MAC Interface VLAN Auth-State Backend-State Port-Status
User-Type
-------- -------------- --------- ---- --------------- -------------
----------- ---------
1 00d0.f864.6909 Fa0/1 1 Authenticated Idle Authed
static
Step 2: Display detailed information about authenticated user.
DES-7200#show dot1x user id 1
User name: qq
User id: 1
Type: static