Filter
Top Products
DES-7200 Configuration Guide Chapter 4 802.1x Configuration
4-58
4.5.2 Application of 802.1X
port-based dynamic VLAN
assignment
4.5.2.1 Network Topology
Figure 13 Topoloy for 802.1X port-based dynamic VLAN assignment
4.5.2.2 Networking requirements
A company has three user groups, namely "development" department, "finance" department
and "market" department. The following needs must be met:
Each member of these three user groups can be connected to any port of the access
device and join the corresponding VLAN after successful authentication ("development"
department to join VLAN2, "finance" department to join VLAN3, and "market" department
to join VLAN4).
Complete data isolation shall be achieved between VLANs corresponding to three user
groups, namely the members of one group cannot exchange data with members of
another group.
4.5.2.3 Configuration Tips
Turn on AAA switch and configure the communication between device and RADIUS
SERVER;