Filter
Top Products
DES-7200 Configuration Guide Chapter 9 DHCPv6 Relay Agent Configuration
9-6
DES-7200(config-if)#ipv6 dhcp relay destination 3001::2
DES-7200(config-if)#end
Cautio
n
1. The IPv6 DHCP Relay Destination command can only be
used on the layer-3 interface.
2. Up to 20 Relay Agent Destination addresses can be
configured on one device.
3. If the Destination address is the multicast address, the
interface name and number must be specified.
9.3.2 Showing the
Destination Address
for the DHCPv6
Relay Agent
Command Function
DES-7200# show ipv6 dhcp relay
destination { all | interface
interface-type interface-number }
Show the IPv6 DHCP relay
destination address list (for the
specified interface).
The following shows the configuration:
DES-7200# show ipv6 dhcp relay destination all
Interface: Vlan1
Destination address(es) Output Interface
3001::2
FF02::1:2 Vlan2
9.4 Showing DHCPv6 Relay
Agent Statistical
Information
To make it convenient for the users to track the information of running the
DHCPv6 Relay Agent function(for example, checking whether a large number
of packet attack occurs or not), DES-7200 provides the function of showing
DHCPv6 relay agent statistical information.
Showing the statistical information
Clearing the statistical information