Filter
Top Products
DES-7200 Configuration Guide Chapter 4 LACP Configuration
4-7
Partner information:
LACP port Oper Port Port
Port Flags Priority Dev ID Key Number State
--------------------------------------------------------------
Gi0/1 SA 61440 00d0.f800.0002 0x3 0x1 0x3d
Gi0/2 SA 61440 00d0.f800.0002 0x3 0x2 0x3d
Gi0/3 SA 61440 00d0.f800.0002 0x3 0x3 0x3d
The following table describes the fileds:
Field Description
Local information Show the local LACP information.
Port Show the system port ID.
Flags
Show the port state flag: “S” indicates that
the LACP is stable and in the state of
periodically sending the LACPPDU; “A”
indicates that the port is in the active mode.
S
Show the device is requesting slow
LACPDUs, that is sending a packet per 30
seconds.
F
Show the device is requesting fast
LACPDUs, that is sending a packet every
second.
A Show the port is in the active mode.
P Show the port is in the passive mode.
State
Show the port aggregation information: “bndl”
indicates that the port is aggregated; “Down”
represents the disconnection port state;
“susp” indicates that the port is not
aggregated.
LACP Port Priority Show the LACP port priority.
Oper Key Show the port operation key.
Port Number Show the port number.
Port State Show the flag bit for the LACP port state.
Partner infomation
Partly show the LACP information of the peer
port.
Dev ID
Partly show the system MAC information of
the peer device.