Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-41
12.5.10 Showing
icmp-guard
Showing icmp-guard configuration
Showing monitored host configuration
Showing trusted host configuration
12.5.10.1 Showing icmp-guard configuration
Use this command to show the icmp-guard configurations.
Command Function
DES-7200# show nfpp icmp-guard
summary
Show the icmp-guard configurations.
For example,
DES-7200# show nfpp icmp-guard summary
（Format of column Rate-limit and Attack-threshold is per-src-ip/per-src-m
ac/per-port.）
Interface Status Isolate-period Rate-limit Attack-threshold
Global Enable 300 4/-/60 8/-/100
G 0/1 Enable 180 5/-/- 8/-/-
G 0/2 Disable 200 4/-/60 8/-/100
Maximum count of monitored hosts: 1000
Monitor period：300s
Note
Field Description
Interface Global refers to the global configuration.
Status Enable/disable the arp-guard.
Rate-limit In the format of source IP address-based
rate-limit threshold / source MAC address-based
rate-limit threshold / port-based rate-limit
threshold.
Attack-threshold In the same format of the Rate-limit.
- No configuration.